Installation Procedure

Fig 1: Identifying Air Bag Electrical Connector

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the passenger air bag mounting bolts.
Tighten: Tighten the passenger air bag mounting bolts to 11 N.m (97 lb in) .
Connect the passenger air bag yellow electrical connector.

Fig 2: View Of Instrument Panel Storage Compartment And Screws

Courtesy of GENERAL MOTORS CORP.

Install the I/P storage compartment. Refer to Instrument Panel Storage Compartment Replacement in Instrument Panel, Gauges, and Console.
Connect the negative battery cable.