Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connector.

Fig 1: Identifying Stop Lamp Switch Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Install the switch (2) and pushrod (4) onto the brake pedal (1) pin.

Fig 2: Expanded View Of Stop Lamp Switch & Brake Pedal
Courtesy of GENERAL MOTORS CORP.
Install the retainer (3) onto the brake pedal (1) pin.
Connect the battery negative cable.