LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 478 (Front Drive Axle) >> Repair Instructions >> Shield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front differential carrier shield.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the front differential carrier shield bolts.

    Tighten:  Tighten the front differential carrier shield bolts to 20 N.m (15 lb ft).

  4. Fig 1: View Of Front Differential Carrier Shield & Bolts
    GM339429Courtesy of GENERAL MOTORS CORP.
  5. Lower the vehicle.