Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Using Flat Tool to Release I/P Retaining Clips

Courtesy of GENERAL MOTORS CORP.

Remove the left knee bolster trim. Refer to Knee Bolster Replacement - Left in Instrument Panel, Gages, and Console.

Fig 2: Identifying Headlamp Switch Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector (2).
Remove the screws securing the switch (1).