Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Antenna Module

Courtesy of GENERAL MOTORS CORP.

Connect the connector at the windshield.
Connect the coax cable.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the bolt securing the antenna module to the vehicle.
Tighten: Tighten the bolt to 9 N.m (80 lb in).
Install the windshield garnish molding. Refer to Windshield Upper Garnish Molding Replacement in Interior Trim.