Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls - 4.8L, 5.3L, and 6.0L.

Fig 1: Disconnecting/Connecting MAF Sensor Wire

Courtesy of GENERAL MOTORS CORP.

Disconnect the mass air flow (MAF) sensor wire (1) from the radiator support retainer clip.
Disconnect the surge tank inlet hose assembly from the radiator support tabs.

Fig 2: Identifying Radiator Support Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the radiator support bolts.

IMPORTANT: Note the position of the radiator support in relationship to the fan shroud. This must be reassembled correctly in order to retain the fan shroud.

Fig 3: Identifying Radiator Support

Courtesy of GENERAL MOTORS CORP.

Remove the radiator support.