LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  2. Remove the right side I/P insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages, and Console.
    3. Fig 1: View Of Body Control Module
    GM440103Courtesy of GENERAL MOTORS CORP.
  3. Push the release tab on the bottom of the bracket to release the body control module (BCM).
  4. Slide the BCM from the bracket.
    5. Fig 2: View Of Electrical Connectors
    GM440108Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connectors.
scientia non olet · About LEMON Manuals