LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Memory Seat Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Memory Seat Control Module
    GM740757Courtesy of GENERAL MOTORS CORP.
  1. Slide the module into the mounting bracket and push until the module is fully seated.
    2. Fig 2: Locating Electrical Connectors
    GM740755Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors.
  3. Install the drivers seat.
  4. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 9 in SIR.
  5. Calibrate the seat. Refer to Memory Seat Calibration Procedure .
scientia non olet · About LEMON Manuals