LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Brakes >> Antilock Brake System And Traction Control System >> Repair Instructions >> Traction Control Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Electrical Connectors
    GM318110Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors.
  2. Push in on the switch bank in order to install the switch bank.
    3. Fig 2: Locating Bolts/Screws For Switch Bank To Instrument Panel
    GM318109Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bolts/screws to the switch bank to instrument panel.

    Tighten:  Tighten the bolts/screws to 2.5 N.m (22 lb in).

    4. Fig 3: View Of Traction Control Switch
    GM738677Courtesy of GENERAL MOTORS CORP.
  4. Install the instrument panel accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals