LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Antilock Brake System) >> Repair Instructions >> Traction Control Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel accessory trim plate. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY  in Instrument Panel, Gages and Console.
    Fig 1: Identifying Instrument Panel Accessory Trim Plate
    G01483740Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolts/screws from the switch bank to instrument panel.
  3. Pull straight out from the instrument panel in order to remove the switch bank from the instrument panel.
    Fig 2: Pulling Straight Out From Instrument Panel To Remove Switch Bank From Instrument Panel
    G01483741Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connectors.
    Fig 3: Disconnecting Electrical Connectors
    G01483742Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals