Engine Cooling System Torque Specifications
ENGINE COOLING SYSTEM TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Discharge Hose-To-Condenser Nut | 12 (16) | |
| Engine Mount Strut | ||
| Bracket Bolt-Upper Radiator Support | ||
| Nut | 35 (48) | |
| Evaporator Inlet Tube-To-Condenser Bolt | 12 (16) | |
| Hood Latch At Support Bolts | 18 (25) | |
| Radiator | ||
| Bracket Bolts | 18 (24) | |
| Lower Air Deflector Bolts | 15 (20) | |
| Thermostat | ||
| Bypass Pipe Nut | 18 (25) | |
| Housing Bolts | 18 (25) | |
| Water Pump Pulley Bolts | 18 (25) | |
| INCH Lbs. (N.m) | ||
| A/C Condenser | ||
| Mounting Bolts | 53 (6) | |
| Tube Clip Bolt | 22 (2.5) | |
| Coolant | ||
| Heater Bolt | 18 (2) | |
| Heat Shield Screws | 18 (2) | |
| Cooling Fan | ||
| Motor Screws | 53 (6) | |
| Nut | 53 (6) | |
| Shroud Bolts | 53 (6) | |
| Radiator Upper Mount Bolts | 89 (10) | |
| Thermostat Bypass Pipe Bolt | 98 (11) | |
| Water Pump Bolts | 89 (10) | |