LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Return Hose Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the right side engine splash shield in order to gain access. Refer to Splash Shield Replacement - Engine  in Body Front End.
  3. Place the drain pan under the vehicle in order to catch any draining power steering fluid.
    4. Fig 1: View Of Return Hose For Power Steering Gear Cooler Pipe
    GM417969Courtesy of GENERAL MOTORS CORP.
  4. Remove the return hose from the power steering gear cooler pipe.
  5. Lower the vehicle.
  6. Remove the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 3.4L.
    7. Fig 2: Locating Power Steering Return Hose
    GM417981Courtesy of GENERAL MOTORS CORP.
  7. Remove the inlet hose from the power steering pump.
  8. Remove the inlet hose from the hose retainer.
  9. Remove the inlet hose.
scientia non olet · About LEMON Manuals