LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Keyless Entry System >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the remote keyless entry module to the carrier.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the remote keyless entry module screws to the bracket (3).

    Tighten:  Tighten the remote keyless entry module screws to the bracket (3) to 2 N.m (18 lb in).

  4. Fig 1: Locating Remote Keyless Entry Antenna
    GM506272Courtesy of GENERAL MOTORS CORP.
  5. Connect the remote keyless entry antenna (2) to the receiver (5).
  6. Connect the remote keyless entry electrical connector (4) to the receiver (5).
  7. Install the left knee bolster. Refer to Knee Bolster Replacement - Left in Instrument Panel, Gages, and Console.
  8. Reprogram the transmitter. Refer to Transmitter Programming .
  9. Verify that the system operates properly.