Removal Procedure
- Remove the armrest screws and the armrest YC5.
- Remove the window handle, if equipped.
Courtesy of GENERAL MOTORS CORP.
- Pull out on the escutcheon in order to remove the lock lever escutcheon. Start with the front edge of the escutcheon.
- Remove the upper corner trim using the following method:
- Pull the upper corner trim at the top edge.
- Pivot the upper corner trim down in order to clear the tab at the trim panel, YC6 and YC7.
- Remove the caps that cover the screws for the assist handle.
- Remove the screws that retain the assist handle to the door.
- Remove the screw at the front edge of the accessory switch mount plate.
- Remove the plate from the trim panel.
- Disconnect the electrical connectors from the switches on the plate, as needed.