LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Battery Negative Cable & Fasteners (RWD)
    GM44400Courtesy of GENERAL MOTORS CORP.
  1. For RWD, install the battery negative cable in the same position as the original.
    2. Fig 2: Locating Battery Negative Cable & Fasteners (A4WD)
    GM44401Courtesy of GENERAL MOTORS CORP.
  2. For A4WD, install the battery negative cable in the same position as the original.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Connect the battery negative cable to the engine.

    Tighten:  Tighten the nut to 40 N.m (29 lb ft).

  4. Install the engine harness to the stud.

    Tighten:  Tighten the nut to 25 N.m (18 lb ft).

  5. Connect the battery negative cable ground lead to the radiator support.

    Tighten:  Tighten the stud to 45 N.m (33 lb ft).

  6. Connect the battery negative terminal bolt to the battery.

    Tighten:  Tighten the bolt to 15 N.m (11 lb ft).

scientia non olet · About LEMON Manuals