LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Generator Mounting Bolts
    GM332407Courtesy of GENERAL MOTORS CORP.
  1. Position the generator on the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Loosely install the mounting bolts.
  3. Install the generator output (BAT) lead.
  4. Loosely install the generator output (BAT) nut.

    Tighten: 

    • Tighten the mounting bolts to 50 N.m (37 lb ft).
    • Tighten the generator output (BAT) terminal nut to 10 N.m (89 lb in).

  5. Connect the regulator electrical connector.
  6. Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical-4.3L.
  7. Install the air cleaner. Refer to Air Cleaner Assembly Replacement in Engine Controls-4.3L.
  8. Connect the battery negative cable.
scientia non olet · About LEMON Manuals