LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Cruise Control System) >> Repair Instructions >> Cruise Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Cruise Control Cable
    GM567876Courtesy of GENERAL MOTORS CORP.
  1. Remove cruise control cable from throttle body lever.
  2. Fig 2: Locating Cruise Control Cable Bead
    GM567789Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not allow the cruise control ribbon to retract into the module assembly
  3. Remove the cruise control cable bead (2) from the end of the ribbon (1).
  4. Disconnect the electrical connector from cruise module.
  5. Fig 3: Identifying Cruise Control Module Bolts
    GM293665Courtesy of GENERAL MOTORS CORP.
  6. Remove the cruise control module bolts.
  7. Remove the cruise control module.