LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Keyless Entry System) >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left knee bolster. Refer to Knee Bolster Replacement - Left in Instrument Panel, Gages, and Console.
  2. Fig 1: Locating Remote Keyless Entry Antenna
    GM506272Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the remote keyless entry antenna (2) from the receiver (5).
  4. Disconnect the remote keyless entry electrical connector (4) from the receiver (5).
  5. Remove the remote keyless entry module screws from the bracket (3).
  6. Remove the remote keyless entry module from the carrier.