Removal Procedure
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
- Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
- Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
- Remove the air cleaner outlet adapter stud.
- Remove the cruise control cable. Refer to Cruise Control Cable Replacement in Cruise Control.
- Remove the accelerator cable. Refer to Accelerator Controls Cable Replacement .
- Remove the stud and nuts retaining the accelerator control cable bracket and position the bracket aside.
- Disconnect the idle air control (IAC) valve harness connector.
- Disconnect the throttle position (TP) sensor harness connector.
- Remove the throttle body retaining studs.
- Remove the throttle body assembly.
- Discard the throttle body seal.