Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Disconnect the negative battery cable.
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
- Drain the fuel tank. Refer to Fuel Tank Draining Procedure .
- Remove the fuel tank. Refer to Fuel Tank Replacement (Cutaway Van Side Tank) or Fuel Tank Replacement (Passenger/Cargo Van) or Fuel Tank Replacement (Cutaway Van Rear Tank) .
- Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
- Disconnect the fuel pump electrical connector (5).
- Remove the electrical connector retaining clip (6) from the fuel level sensor.
- Disconnect the electrical connector (7) from the fuel level sensor under the fuel sender cover.
- Remove the retaining clip (4) from the fuel level sensor.
- Squeeze the locking tangs and remove the fuel level sensor (3).
CAUTION:
Refer to Battery Disconnect Caution in Cautions and Notices.