LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Chevy Express G3500, Van Passenger Extended >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System - 4.3L - Introduction) >> Repair Instructions >> Fuel Pressure Connection Valve Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Valve Core
    GM586374Courtesy of GENERAL MOTORS CORP.
  1. Use a standard valve core tool in order to install a new valve core (2).
  2. Tighten the fuel filler cap.
  3. Connect the negative battery cable.
  4. Inspect for leaks.
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition for 2 seconds.
    4. Inspect for fuel leaks.
  5. Install the fuel pressure connection valve cap (3).
  6. Install the engine cover. Refer to Engine Cover Replacement Interior Trim.
scientia non olet · About LEMON Manuals