Removal Procedure

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Fuel Sender Assembly

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

Disconnect the negative battery cable.
Relieve the fuel pressure. Refer to Fuel Pressure Relief Procedure .
Raise the vehicle.
Remove the fuel tank. Refer to Fuel Tank Replacement (Cutaway Van Side Tank) or Fuel Tank Replacement (Passenger/Cargo Van) or Fuel Tank Replacement (Cutaway Van Rear Tank) .
Remove the fuel pressure sensor (1).