Removal and Replacement

Multifunction Alarm Module Replacement

Removal Procedure





1. Remove the drivers side knee bolster. Refer to Knee Bolster Bracket Replacement - Left (Knee Bolster Bracket Replacement - Left) .
2. Disconnect the multi-function audio alarm module (2) electrical connector (1).
3. Remove the multi-function audio alarm module (2) from the vehicle.



Installation Procedure





1. Install the multi-function audio alarm module (2) to the mag beam.
2. Connect the electrical connector (1) to the multi-function audio alarm module (2).
3. Install the drivers side knee bolster. Refer toKnee Bolster Bracket Replacement - Left (Knee Bolster Bracket Replacement - Left) .