LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Impala SS >> Repair and Diagnosis >> Electrical >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Multifunction Alarm Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the instrument cluster trim panel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Impala)  or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) .
  2. Fig 1: Multifunction Alarm Module & Electrical Connector
    GM697546Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws from the radio delete plate.
  4. Remove the radio delete plate from the instrument panel.
  5. Fig 2: Radio Delete Plate & Screws
    GM697548Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector from the multifunction alarm module.
  7. Remove the multifunction alarm module from the instrument panel by lifting up and out.