LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 596 (Programming And Setup - All Systems) >> Repair Instructions >> Body Control Module Programming and Setup >> Body Control Module (BCM) Replacement and Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module (BCM) Replacement and Reprogramming

WARNING: This page is about a different car, the 2007 Saturn Sky. However, it is still accessible from the selected car via links, so may be relevant.

If the BCM is replaced or requires reprogramming, the following procedures must be performed in the specified order:

  1. BCM Setup - Using a scan tool, go to Vehicle Control Systems » Computer/Integrating Systems » Module Setup » Body Control Module. Select Setup BCM and follow the on-screen instructions, making sure to select the proper RPOs and input the VIN correctly.
  2. BPP Sensor Calibration. Refer to Brake Pedal Position Sensor Calibration
  3. Program Key Fobs. Refer to Transmitter Programming
  4. Setup SDM Part Number in BCM - Using a scan tool, go to Vehicle Control Systems » Computer/Integrating Systems » Module Setup » Body Control Module. Select Setup SDM Part Number in BCM and follow the on-screen instructions.
scientia non olet · About LEMON Manuals