LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 596 (Programming And Setup - All Systems) >> Repair Instructions >> Inflatable Restraint Sensing and Diagnostic Module Programming and Setup >> Sensing and Diagnostic Module (SDM) Replacement and Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensing and Diagnostic Module (SDM) Replacement and Reprogramming

WARNING: This page is about a different car, the 2007 Saturn Sky. However, it is still accessible from the selected car via links, so may be relevant.

If the SDM is replaced or requires reprogramming, the following procedures must be performed in the specified order:

  1. Setup SDM- Using a scan tool, go to Vehicle Control Systems » Computer/Integrating Systems » Module Setup » Supplemental Inflatable Restraint. Select Setup New SDM and follow the on-screen instructions.
  2. Setup SDM Part Number in BCM - Using a scan tool, go to Vehicle Control Systems » Computer/Integrating Systems » Module Setup » Supplemental Inflatable Restraint. Select Setup SDM Part Number in BCM and follow the on-screen instructions.
scientia non olet · About LEMON Manuals