Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| 36-Volt Terminal Block Nut to Generator Control Module | 10 N.m | 89 lb in |
| Generator Control Module 3 Phase Cable Bracket Bolt | 8 N.m | 71 lb in |
| Generator Control Module 3 Phase Cable Bracket to Clip Bolt | 10 N.m | 89 lb in |
| Generator Control Module 3 Phase Cable to Generator Starter Nut | 8 N.m | 71 lb in |
| Generator Control Module 3 Phase Cable Terminal Block Nut | 8 N.m | 71 lb in |
| Generator Control Module Bracket to Module Bolt | 10 N.m | 89 lb in |
| Generator Control Module Bracket Nut | 10 N.m | 89 lb in |
| Generator Control Module Bracket Reinforcement Bolt/Nut | 10 N.m | 89 lb in |
| Generator Control Module Cover Bolt | 10 N.m | 89 lb in |
| Generator Control Module Ground Strap Nut | 10 N.m | 89 lb in |
| Generator Starter Bolt | 58 N.m | 43 lb ft |
| Generator Starter Cover Bolt | 5 N.m | 44 lb in |
| Rear Generator Control Module 3 Phase Cable Bolt | 8 N.m | 71 lb in |