Scan Tool Output Controls
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Power Sliding Door Module
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| PSD Latch Test | Unlatched/Latched | The power sliding door control module (PSDM) actuates the power sliding door (PSD) latch assembly to either, unlatch the door when you select Unlatch, or, latch the door when you select Latch. The PSD must either be in the fully closed position or in the ajar position, for the test to operate properly. Also, do not select either function, Unlatch or Latch, twice consecutively; each selection must be followed by selecting the opposite function. The latch should follow the scan tool command. |
| PSD Open/Close Test | Open/Close | The power sliding door module (PSDM) actuates the power sliding door motor/clutch assembly to either, open the power sliding door (PSD) when you select Open or close the PSD when you select Close. Once the PSD has begun moving in the direction you have selected, do not attempt to stop it by selecting the opposite direction; always let the door finish moving in the direction you have selected before you try to operate it to the opposite direction. |