Installation Procedure

Fig 1: Removing/Installing Console Shift Control Assembly

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices

Install the console shift control retaining nuts.
Tighten: Tighten the console shift control retaining nuts to 24 N.m (18 lb ft).
Install the park/lock cable. Refer to Park Lock Cable Replacement .
Install the automatic transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Replacement .

Fig 2: Removing/Installing Console Shift Control Wiring Harness

Courtesy of GENERAL MOTORS CORP.

Install the console shift control wiring harness.
Install the console wiring harness.
Install the console trim plate. Refer to Trim Plate Replacement - Front Floor Console (Monte Carlo) or Trim Plate Replacement - Front Floor Console (Impala) or Console Replacement - Front Floor (Impala) or Console Replacement - Front Floor (Monte Carlo) in Instrument Panel, Gauges and Console.