LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Cruise Control System) >> Repair Instructions >> Cruise Control Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition OFF.
    2. Fig 1: Removing Cruise Control Module Bolts
    GM897266Courtesy of GENERAL MOTORS CORP.
  2. Remove the cruise control module to bracket bolts leaving the bracket attached to the frame rail.
  3. Remove the cruise control throttle cable clip attached to the front of the dash.
  4. Pull the cruise control module up behind the power brake booster.
    5. Fig 2: Disconnecting Cruise Control Cable
    GM896792Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the cruise control module harness connector.
    • Cruise Control Throttle Cable (1)
    • Cable Snap (3)
    • Cable End (4)
  6. Disconnect the cruise control throttle cable snap from the throttle body cam.
  7. Unclip the cruise control throttle cable from both attachment clips.
    8. Fig 3: Disconnecting Cruise Control Throttle Cable From Module
    GM887102Courtesy of GENERAL MOTORS CORP.
  8. Disconnect the cruise control throttle cable from the module by rotating the cable 1/4 turn counter-clockwise at the module.
  9. Remove the cable from the connecting strap.
  10. Remove cruise control throttle cable.
scientia non olet · About LEMON Manuals