LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Engine Controls (Introduction)) >> Repair Instructions >> Fuel Injector Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Rail Assembly
    GM1467502Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel rail assembly. Refer to Fuel Rail Assembly Replacement .
  2. Disconnect the electrical connector (5) for the fuel injector (7).
  3. Remove the retaining clip (6) for the fuel injector (7).
    4. NOTE: Use care in removing the fuel injectors in order to prevent damage to the fuel injector electrical connector pins or the fuel injector nozzles. Do not immerse the fuel injector in any type of cleaner. The fuel injector is an electrical component and may be damaged by this cleaning method.
  4. Remove the fuel injector (7) from the fuel rail (2).
scientia non olet · About LEMON Manuals