Enter Programming: Notes
WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
To enter programming with the Driver Information Center (DIC), perform the following actions:
- Turn the ignition to RUN.
- Place the vehicle in PARK.
- Press the RESET button on the DIC in order to clear any Instrument Panel Cluster (IPC) warning messages until you clear them all (LOW VOLTAGE, DOOR AJAR, etc).
- Press the OPTIONS button on the DIC.
- The DIC displays CONFIGURE OPTIONS.