LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Seat System) >> Repair Instructions >> Heated Seat Control Module Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Wire Assembly To Seat Cushion Frame
    GM281999Courtesy of GENERAL MOTORS CORP.
  1. Position the heated seat module to the seat cushion foam support wires.
  2. Secure the heated seat module to the seat cushion foam support wires with tie straps.
  3. Connect harness connectors to the memory seat control module.
    4. Fig 2: Seat Mounting Component View
    GM71215Courtesy of GENERAL MOTORS CORP.
  4. Install the seat. Refer to Seat Replacement .
  5. Reprogram the Heated Seat Module. Refer to Heated Seat Control Module Programming and Setup in Programming and Setup.
scientia non olet · About LEMON Manuals