LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Antilock Brake System And Traction Control System) >> Repair Instructions >> Electronic Brake Control Module Replacement >> Assembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Assembly Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Do not attempt to repair a damaged solenoid pack or control unit assemblies. Repair of these assemblies is not possible. Do not lubricate or oil the EBCM.
  1. Disconnect the pump motor electrical connector.
  2. Remove the EBCM to BPMV screws.
  3. Separate the EBCM from the BPMV.
  4. Position the EBCM on the BPMV.
  5. Install the attaching screws.
  6. Connect the pump motor electrical connector.
scientia non olet · About LEMON Manuals