LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Cellular Communication System) >> Repair Instructions >> Antenna Assembly Replacement - Cellular And Navigation >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the antenna assembly to the windshield and connect the coaxial leads to the antenna.
  2. Route the antenna coaxial cable to the windshield header.
  3. Align the antenna assembly to the windshield bracket retaining clips. Push the assembly to the driver side of the vehicle to engage the retainers.
    Fig 1: Installing Antenna Assembly Cellular & Navigation
    GM1222567Courtesy of GENERAL MOTORS CORP.
  4. Install the windshield upper garnish molding. Refer to WINDSHIELD UPPER GARNISH MOLDING REPLACEMENT in Interior Trim.
scientia non olet · About LEMON Manuals