Sensor Learn Procedure
WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Before proceeding with the procedure below, ensure that no other learn procedure is being performed simultaneously.
- Select the ACC position on the ignition switch.
- Simultaneously press the keyless entry transmitter lock and unlock buttons until a horn chirp sounds, indicating the TPM learn mode has been enabled.
- Starting with the left front tire, hold the antenna of the J-46079 against the tire sidewall close to the wheel rim at the valve stem location then press and release the Activate button and wait for a horn chirp. See Special Tools .
- After the horn chirp sounds, proceed as in step 3 for the next 3 sensors in the following order:
- Right front
- Right rear
- Left rear
- After the left rear sensor is learned, a double horn chirp will sound indicating all sensor IDs have been learned.
- Select the OFF position on the ignition switch to exit the TPM learn mode.