Front Toe Adjustment

Front Toe Adjustment





1. Loosen the jam nut on the outer tie rod (2).

2. Rotate the inner tie rod (1) to the required toe specification setting. Refer to Wheel Alignment Specifications.

Notice: Care must be taken that the boots are not twisted when rotating the inner tie rods, or damage to the boots may result.


3. Tighten the jam nut on the outer tie rod.

Tighten
Tighten the outer tie rod jam nut to 75 Nm (55 ft. lbs.).

Notice: Refer to Fastener in Service Precautions.

4. Check the toe setting after tightening.
5. Re-adjust the toe setting if necessary.