LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Uplander Base, Van Passenger Extended >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control System - Suspension Leveling >> Repair Instructions >> Air Compressor Shield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the ALC shield (2) onto the vehicle.
  2. Install the ALC relay onto the vehicle. Refer to Automatic Level Control Relay Replacement .
    3. Fig 1: Locating ALC Shield Bolt
    GM898568Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the ALC shield bolt (1) and retainers to the vehicle.

    Tighten:  Tighten the bolts to 6 N.m (53 lb in).

  4. Install the ALC compressor assembly onto the vehicle. Refer to Air Compressor Replacement .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals