Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Position the child seat tether brackets to the slot in the rear shelf.
For Impala only, rotate the child seat tether brackets 90 degrees in order to install the child seat tether brackets into the slot.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the screws to the child seat tether brackets.
Tighten: Tighten the screws to 20 N.m (15 lb ft).

Fig 1: Installing Child Seat Tether Brackets

Courtesy of GENERAL MOTORS CORP.

Install the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf (Impala) or Trim Panel Replacement - Rear Window Shelf (Monte Carlo) in Interior Trim.