LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Introduction & Repair Instructions >> Repair Instructions >> Automatic Transmission Range Selector Cable Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Illustrating Proper Routing Of Automatic Transaxle Range Selector Cable
    GM161144Courtesy of GENERAL MOTORS CORP.
  1. Properly route the automatic transaxle range selector cable through the engine compartment.
  2. Fig 2: View Of Automatic Transaxle Range Selector Cable In The Cowl
    GM161138Courtesy of GENERAL MOTORS CORP.
  3. Install the automatic transaxle range selector cable through the cowl.
  4. Fig 3: Removing/Installing Range Selector Cable From Steering Column Bracket
    GM161140Courtesy of GENERAL MOTORS CORP.
  5. Install the automatic transaxle range selector cable to the steering column bracket.
  6. Fig 4: View Of Automatic Transaxle Range Selector Cable Retaining Clip
    GM161141Courtesy of GENERAL MOTORS CORP.
  7. Install the retaining clip to the automatic transaxle range selector cable.
  8. Install the automatic transaxle range selector cable to the column control lever.
  9. Install the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages and Console.
  10. Fig 5: View Of Automatic Transaxle Range Selector Cable
    GM368792Courtesy of GENERAL MOTORS CORP.
  11. Install the automatic transaxle range selector cable to the automatic transaxle range selector cable bracket.
  12. Install the automatic transaxle range selector cable to the automatic transaxle range selector lever.
  13. Fig 6: Locating Automatic Transaxle Range Selector Cable Retaining Clip
    GM161164Courtesy of GENERAL MOTORS CORP.
  14. Install the retaining clip to the automatic transaxle range selector cable.
  15. Adjust the automatic transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Adjustment .
  16. Install the throttle body air inlet duct. Refer to Air Cleaner Element Replacement in Engine Controls - 3.4L.