Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Slide the module into the mounting bracket and push until the module is fully seated.

Fig 1: Sliding Module Into Mounting Bracket And Pushing
Courtesy of GENERAL MOTORS CORP.
Connect the electrical connectors.
Install the drivers seat.
Enables the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM in Airbag.

Fig 2: Identifying Power Seat Adjuster Mechanism
Courtesy of GENERAL MOTORS CORP.