LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Venture LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Wiper System And Washer System) >> Repair Instructions >> Wiper Module Cover Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the wiper drive system module cover to the pinchweld flange.
  2. Install the wiper drive system module cover to the pinchweld flange, pressing down until fully seated.
  3. Install the hood rear seal to the pinchweld flange.
  4. Close the hood.
    Fig 1: Installing Wiper Drive System Module Cover & Retainers
    G01813096Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals