Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2007 GMC Savana Special, 2007 GMC Savana Camper Special, 2007 GMC Savana, 2007 Chevrolet RV Cutaway, and 2007 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the right side knee bolster trim panel. Refer to Passenger Knee Bolster Replacement .
- Disconnect the electrical connectors (2) from the body control module (BCM) (1).
- Release the tabs (2) retaining the BCM (1) to the bracket.
- Remove the BCM (1) from the vehicle.