Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2007 GMC Savana Special, 2007 GMC Savana Camper Special, 2007 GMC Savana, 2007 Chevrolet RV Cutaway, and 2007 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the harness connector to the switch.
- Install the switch into the switch plate.
- Ensure that the switch is secure into both retaining tabs.
- Install the switch plate to the I/P.