LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Epica LT >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Wheel Speed Sensor Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Hub And Wheel Speed Sensor
    GM1255821Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The wheel speed sensor is served as an assembly, hub-wheel speed sensor. Therefore, the additional working procedure for air gap is not needed.
  1. Install the front hub unit. Refer to Steering Knuckle Replacement .
  2. Connect the front wheel speed sensor electrical connector.
  3. Lower the vehicle.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals