Scan Tool Data Definitions
The ABS scan tool data definitions contain a brief description of all ABS related parameters available on the scan tool. The parameters available on the scan tool are listed below in alphanumeric order.
- ABS Active
-
The scan tool displays Yes/No. The scan tool displays No when a when not active.
- ABS Warning Lamp
-
The scan tool displays On/Off. The scan tool displays Off when a when not active.
- Stop Lamp Switch Status
-
The scan tool displays Applied/Released The scan tool indicates Released when the brake is not applied.
- DRP Active
-
The scan tool will display Yes/No depending on the state of the DRP.
- DRP Disabled
-
The scan tool will display Yes/No depending on the state of the DRP.
- ETS Active Lamp
-
The scan tool displays On or Off. The scan tool will display On when the ETS is active and Not during normal vehicle operation.
- ETS Disabled Lamp
-
The scan tool will display Yes or No depending on the state of the ABS indicator.
- Ignition Voltage Signal
-
The scan tool displays 0-18 Volts. The scan tool displays approximately 12 Volts when the ignition is ON.
- LF Wheel Speed Sensor
-
The scan tool displays 0-327 km/h (0-204 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 mph).
- LR Wheel Speed Sensor
-
The scan tool displays 0-327 km/h (0-204 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 mph).
- LF Outlet Valve Command
-
The scan tool displays Active/Inactive. The scan tool displays Active when the left front Outlet valve solenoid is commanded on.
- LR Outlet Valve Command
-
The scan tool displays Active/Inactive. The scan tool displays Active when the left front Outlet valve solenoid is commanded on.
- RF Outlet Valve Command
-
The scan tool displays Active/Inactive. The scan tool displays Active when the right front Outlet valve solenoid is commanded on.
- RF Inlet Valve Command
-
The scan tool displays Active/Inactive. The scan tool displays Active when the right front Inlet valve solenoid is commanded on.
- RF Wheel Speed Sensor
-
The scan tool displays 0-327 km/h (0-204 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 mph).
- RR Wheel Speed Sensor
-
The scan tool displays 0-327 km/h (0-204 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 mph).
- RR Outlet Valve Command
-
The scan tool displays Active/Inactive. The scan tool displays Active when the right front Inlet valve solenoid is commanded on.
- RR Inlet Valve Command
-
The scan tool displays Active/Inactive. The scan tool displays Active when the right front Inlet valve solenoid is commanded on.