Removal Procedure

WARNING: This page is about a different car, the 2005 Pontiac Pursuit and 2005 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Refer to Gasoline/Gasoline Vapors Caution in Cautions and Notices.

Fig 1: View Of Fuel Level Sensor Tabs

Courtesy of GENERAL MOTORS CORP.

Remove the fuel pump module assembly. Refer to Fuel Sender Assembly Replacement .
Release the fuel level sensor wiring harness from the molded-in tab (1) on the pump module bowl.
Disconnect the fuel level sensor electrical connector from the pump module.
Depress the retaining tab (2) on the sensor and begin to slide the level sensor away from the pump module.
Carefully slide the level sensor the rest of the way off of the pump module.