Installation Procedure
WARNING: This page is about a different car, the 2010 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
- Install the liftgate window into the opening. Refer to Adhesive Installation of Liftgate Windows .
- Connect the rear window defogger connectors.
- Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Install the rear wiper arm. Refer to Rear Window Wiper Arm Replacement .
- Close the liftgate.