Communication Interface Module Battery Replacement

WARNING: This page is about a different car, the 2007 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Communication Interface Module Battery Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the rear seat. Refer to Rear Seat Replacement . Remove the right rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .
1	Nut, Communication Interface Module Battery (Qty: 3) Tighten: 10 N.m (89 lb in)
2	Battery, Communication Interface Module Tip: Disconnect the electrical connector.

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Remove the rear seat. Refer to Rear Seat Replacement .
Remove the right rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .

Nut, Communication Interface Module Battery (Qty: 3)

Tighten: 10 N.m (89 lb in)

Battery, Communication Interface Module
Tip: Disconnect the electrical connector.