Theft Deterrent Module Programming and Setup: Notes

Each of the following service procedures requires programming or setup procedures to be performed on the theft deterrent control module.

Theft Deterrent Control Module Replacement  See Theft Deterrent Control Module Replacement 

If the theft deterrent control module is replaced, the following procedures must be performed:

1. Set Up a New Theft Deterrent Control Module-Refer to Programming Theft Deterrent System Components 

2. 10-Minute Relearn Procedure-Refer to Programming Theft Deterrent System Components 

Replacing Keys 

If a key is replaced, the following procedure must be performed: Replacing Keys 

Adding Keys 

If a key is being added, the following procedure must be performed: Adding Keys